Control your office or commercial space efficiently and accurately.
Supplied as Application Specific controllers, the FCU-4 BACnet enabled office controllers are set up and configured by Titan Products to suit your project and application needs.
All controllers are provided as standard complete with BACnet MS/TP communications to allow seamless integration on to the building management system (BMS) allowing all control parameters to be read or written to over the network. This is ideal when wanting to montior and change the control settings within all controllers in the office or commercial space.
The controllers also offer Master / Slave grouping functionality as standard which, when used in larger office or commercial spaces, allows all controllers to control to same control parameters. All Slave controllers will control to the same control parameters set within the Master controller and have the option to either control from the Master Controller's control sensor input or from their own control sensor to ensure their are no hot or cold spots within the space.
The FCU-4 range of controllers offer a wide range of input and output options to offer extremely flexible control to suit your application. The controllers can control either 0-10V EC fans or up to 3 speed relay switching fans while the heating and cooling outputs can be either 24V AC ON/OFF, PWC, TPC (raise / lower) or 0-10V.
To prevent cold draughts the controllers incorporate a low limit temperature setting, which when used, will automatically reduce the cooling output to ensure the off-coil air temperature is not too cold and uncomfortable for the occupants working in the space.
Night Set Back (ECO) and Frost Protection settings are available for unoccupied working hours to ensure the building is held at an efficient level to prevent excess energy used to bring the building back up to temperature during occupied times.
Want to discuss your project requirements? Give us a call on 0161 406 6480